Introducing ✦ The Master Control Station

The Conductor
/ Sequencer

It doesn't drive a motor. It commands every motor. A 7" touchscreen that turns a room full of independent Vibes Motor controllers into one perfectly synchronised ensemble — live, or on a fully choreographed timeline.

Up to 10 Groups

Live Conductor Mode

Timed Sequencer Mode

Serves Its Own Wi-Fi

MIDI In & Out

Audio Playback

USB Flash Drive Support

Built-In Monitored Battery

Read the Story

Where It Fits

Two Layers. One System.

Every Vibes Motor Unlimited controller — V1, V2, V2 BT Micro, and V3 — mounts directly on an instrument and drives its motor. The Conductor / Sequencer is different: it doesn't drive anything itself. It's the remote command station that talks to those controllers, singly or as coordinated groups, over its own Wi-Fi network.

Layer One

The Motor Controllers

V1 · V2 · V2 BT Micro · V3 — one per instrument, mounted on the frame, driving that instrument's motor directly. Each one can be controlled by its own panel, a phone app, or now — the Conductor.

✦

Layer Two

The Conductor / Sequencer

The master station. One 7" touchscreen that reaches every controller in the room — live, or on a pre-built timeline — and coordinates them into groups of any size.

Two Modes. Tap the Title to Switch.

Conductor Mode & Sequencer Mode

Conductor = you drive the motors live, in both directions. Sequencer = the timeline drives the motors on a fixed schedule, one direction only. Your group setups are remembered separately for each mode, so switching between them never disturbs the other.

Live · Hands-On · Bidirectional

Conductor Mode

Think of it as a live mixing desk for your motors. Set each group's program, speed, depth, run state and IR sensor mode — every instrument follows immediately.

Control flows both ways: when any player adjusts their own controller, it takes the lead for the whole group. Any member can drive the group at any moment — and the Conductor can step back in whenever it wants.

Timed · Pre-Programmed · One-Way

Sequencer Mode

Build a timeline in advance. Place events at exact moments — each one a full snapshot of every group's settings, with an optional audio clip or MIDI file attached.

Press play and the timeline drives every instrument on a fixed schedule, with your music. Perfect for choreographed pieces where every change has to land exactly on cue.

The Big One

Play It Like an Instrument

Plug a standard USB MIDI keyboard straight into the Conductor / Sequencer, and it stops being just a remote control — it becomes a genuinely musical instrument in its own right. Incoming notes can trigger controller states, jump the sequencer timeline, or map live performance data directly onto the motors.

Note & velocity triggers — assign specific notes, octaves, or velocity ranges to jump to a program, an IR sensor mode, or a sequence flag.
Live velocity mapping — map either of your control sliders to the loudness of incoming MIDI notes, so they react exactly the way you want to the keyboard.
Live pitch mapping — yes! You can have more or less motor speed or vibrato by playing higher or lower notes on incoming MIDI. Map it in either direction.
Reversible mappings — flip any mapping's direction with one tap, per group, per parameter.
MIDI files on the timeline — attach a .mid file to a sequence event, and the device streams it out in perfect sync with the motor changes.

No Laptop. No Router. No Compromise.

Built for the Real Venue

The Conductor / Sequencer doesn't need an internet connection, a venue Wi-Fi network, or a laptop backstage. It serves its own Wi-Fi access point that every controller in the room connects to directly — the whole show runs standalone, on battery, from a single screen.

Own Wi-Fi Network

Serves its own access point — every motor controller and phone app connects directly. No venue internet required.

Built-In Battery

A flatpack Li-ion cell with full monitoring — charge status shown live on every screen, right down to voltage.

Stereo Audio Output

Dedicated high-quality audio out, driving headphones or line-level output for perfectly synced playback.

USB Flash Drive Support

Import and back up audio, MIDI, and sequence files fast — mount a drive right on the Files page.

Up to 10 Groups

One instrument per group, or many — mix and match. A row of vibes moves as one, or every instrument stands alone.

15 Built-In Programs

From steady vibrato sweeps to pulsing gaps to the new pedal-triggered delayed vibrato — every program, every group.

Save & Load Everything

Full sequences, live baselines, and group configurations all save to internal storage, SD card, or USB.

Adjustable Brightness

Auto-dimming screen with configurable brightness levels and timeout — easy on the eyes during long sets.

"Any member of a group can be in control of the whole group at any moment — the person who last moved a control leads it. This is a room full of instruments that finally think as one."

— Jim McCarthy · Designer · Vibes Motor Unlimited

Coming Soon

The Master Station for Your Whole Ensemble

The Conductor / Sequencer is currently in final testing alongside the full V1–V3 controller range. Follow the story on the blog, or leave your email on the coming soon page to be notified the moment it's ready.

Latest Update

The Conductor/ Sequencer